Skip to content
LanguageEnglish
+34 663 42 97 39 Get a Free Quote

Street noise: which windows actually reduce it

Before paying for acoustic glass it is worth knowing where the noise gets into your flat. There are four ways in the glass, the roller-shutter box, the seals and the perimeter joint and the glass is the answer to only one of them.

This article explains what the decibels on a quote mean, why replacing a window sometimes cuts less noise than you expected, and the six questions worth asking before you sign.

Closed window of a Barcelona flat facing a street with traffic

Where the noise gets in and what gives it away

Where it gets in What gives it away What needs fixing
The glass A steady traffic hum, much the same by day and by night The glazing: thickness, asymmetry and an acoustic interlayer
The roller-shutter box Louder with the shutter up, and the noise seems to come from above Insulate the box from inside, or fit a compact insulated one
The seals and the lock A draught with the window shut, or whistling on windy days The hardware and the gaskets sometimes only an adjustment
The perimeter joint The noise seems to come from the wall, around the frame Re-seal the joint between the frame and the masonry
If you are not sure, start with the roller-shutter box. It is the weakest point on most Barcelona façades and the one almost nobody checks.

Why decibels are misleading

A decibel is not an ordinary unit. It does not add up like euros or centimetres the scale is logarithmic. That is why dropping 10 dB is not «a bit quieter», it is half the perceived noise, and why a two or three decibel improvement is barely noticeable even though it looks like progress on paper.

For reference: a quiet street sits at 50 – 55 dB, a street with moderate traffic at 60 – 65 dB, an avenue or a ring road at 70 – 75 dB, and a nightlife area reaches 80 – 90 dB.

A quote promising a «noticeable improvement» tells you nothing. What does tell you something is the Rw of the glass the number for how many decibels it stops and above all how the window ends up once it is fitted.

Glazing build-up → decibels stopped

4/16/430 – 32 dB
6/16/434 – 36 dB
44.2/20/642 – 45 dB

There are 12 – 13 dB between the first and the last: more than half the perceived noise.

Where the noise gets into your flat

1The glass: the part everybody looks at first

A standard double unit, 4/16/4, sits around 30 – 32 dB. Make the two panes different thicknesses a 6/16/4 and it rises to 34 – 36 dB: each pane resonates at a different frequency, so one stops what the other lets through. A laminated 44.1/16/4 puts you at 37 – 39 dB, and an acoustic laminate 44.2/20/6 at 42 – 45 dB. The acoustic interlayer alone is worth 3 – 5 dB.

2The roller-shutter box: the hole nobody looks at

This is the weakest point on almost every façade. A traditional box is a hollow case opening into the room: noise comes straight in without passing through the glass at all. It can be insulated from inside with rock wool and a sealed cover, or replaced with a compact insulated box, which usually costs 150 – 250 € more per window. Fitting 45 dB glass under an uninsulated box is like shutting the door and leaving the window open.

3The seals and the lock: where air passes, sound passes

Air tightness is graded in classes under EN 12207, from 1 to 4. Below class 3 the glass hardly matters: sound comes through the gaps between sash and frame. If you feel a draught with the window closed, the glass is not your problem. Sometimes an adjustment of the hardware fixes it with no new parts.

4The perimeter joint: the fitting, not the window

There is a gap between the frame and the masonry. Filled with foam and left unsealed, noise comes in around the perimeter and seems to come from the wall. It is why the same window gives different results in two flats of the same building: the product did not change, the person who fitted it did.

Open roller-shutter box showing the cavity the noise comes through

Why the noise sometimes drops less than you expected

Because a window is a chain, and a chain is not worth what its strongest link is worth. As a rough split, the glass accounts for about 70 % of the acoustic result, the frame 20 %, and the fitting the remaining 10 %.

Those percentages assume everything else was done properly. The moment there is an open shutter box or an unsealed perimeter they stop meaning anything: noise does not come in where the surface is biggest, it comes in wherever it finds a gap.

A window does not sound like its best component, it sounds like its worst point. That is why the most expensive glass fitted under an uninsulated shutter box disappoints almost every time, and why the whole assembly should be decided before the glass is chosen.

What to ask before you sign the quote

  1. Ask for the Rw of the glass, not the word «acoustic». «Acoustic» is not a measurement. Rw is, and it belongs on the quote next to the glazing specification.
  2. Ask whether the two panes are different thicknesses. Two identical panes resonate together. A 6/16/4 outperforms a 4/16/4 at almost no extra cost.
  3. Ask what happens to the roller-shutter box. If the answer is «the box stays as it is», most of the conversation about decibels has just lost its point.
  4. Ask for the air permeability class. EN 12207, class 3 or better. The manufacturer has this figure and almost nobody asks for it.
  5. Ask how the perimeter is sealed. Which material, how many layers, and who does it. Fitting is the 10 % that decides whether the rest was worth paying for.
  6. Ask for it in writing. A quote that states the glazing, the permeability class, the treatment of the box and the sealing can be compared with another one. «Premium acoustic window» cannot.

A quote that does not answer these six questions is not cheaper, it is less specific. The difference shows up the morning you hear the seven o’clock scooter again.

Window quote on a table with the acoustic specifications marked

When acoustic glass is genuinely worth it

  • You live on an avenue, a ring road or a through street with constant traffic.
  • The window faces a nightlife area and the problem is at two in the morning, not at midday.
  • You sleep in the room facing the street and the noise wakes you.
  • You have already dealt with the shutter box and the seals, and the noise still bothers you.
  • You are replacing the window anyway: the extra cost of acoustic glass is small next to doing the job twice in three years.

What doesn’t work

  • Heavy curtains. They absorb echo inside the room. They do not stop noise coming from outside.
  • Stick-on draught strips on their own. They help if the window closes badly, but they do not turn single glazing into acoustic glazing.
  • Triple glazing «because it’s more». It is a thermal solution. If all three panes are identical it can block less noise than a well-specified double unit.
  • Replacing the window without touching the box. It is the big expense done halfway, and it is the commonest mistake.
  • Trusting a quote that says «acoustic» without an Rw. No number, no commitment.

Frequently asked questions

How many decibels do you really gain by replacing the windows?

It depends on the starting point and, above all, on whatever weak point is left unsolved. Going from single glazing to a well-fitted acoustic laminate is a big jump, but if the shutter box is still hollow much of that gain never reaches you. Remember that 10 dB less is half the perceived noise.

Does triple glazing block more noise?

Not necessarily. Triple glazing is a thermal solution. For noise it matters more that the panes have different thicknesses and that there is an acoustic interlayer: an 44.2/20/6 laminate outperforms many symmetrical triple units.

Can the shutter box be insulated without replacing the window?

Yes, and it is usually the best value of anything on this list: insulated from inside with rock wool and closed with a sealed cover. Replacing it with a compact box costs 150 – 250 € more per window.

Does a second window block more than one good window?

On the numbers, yes: two windows with an air gap between them reach 45 – 55 dB. The cost is practical rather than financial it takes up space, makes cleaning awkward, and is not always allowed on protected façades.

If the window is more airtight, will condensation appear?

It can, and it is better to know beforehand. An airtight window stops ventilating the flat through its gaps, so moisture that used to escape now stays inside. It is not a fault of the glass: it is ventilation, and it is fixed by habit rather than by building work.

Read on

If you don’t know where the noise is getting in

Send us a short video filmed from your living room with the window shut, and tell us which street you live on. That alone separates a lot: an even hum points to the glass, a whistle points to the seals, and noise that rises and falls as cars pass with the shutter up points to the box.

If it needs looking at in person, the survey is free and commits you to nothing. And if what you need is the box insulated rather than the window replaced, we will tell you so on the spot.

Send a videoor call us on +34 663 42 97 39

Keep Exploring

Related Articles & Insights

Get In Touch

Need advice? We're here to help.

At ECOVEN our team of specialists guides you through every stage of your aluminium and PVC project, from the first idea to the final installation.
We work in Barcelona, Cerdanyola, Ripollet and Sant Cugat, always putting service first.

Have questions or need a tailored quote? Fill in the form and a specialist will get back to you shortly.

Call us +34 663 42 97 39 Email us ecovenbcn@gmail.com
Work area Barcelona · Cerdanyola · Ripollet · Sant Cugat
Hours Mon–Fri 9:00–18:00

ECOVEN PREMIUM

Schedule Your Free Assessment