Skip to content
LanguageEnglish
+34 658 56 31 16 Get a Free Quote

Smart-Slide sliding door

140 mm Frame mounting depth
up to 40 mm Multilayered glass pane width
up to 200 kg Leaf weight
1570х2500mm Maximum leaf size
The deceptive ease in movement of Smart-Slide doors does not mean that this system fails to ensure the desired level of heat conservation in the room. In terms of thermal conductivity, the Smart-Slide sliding structure (when equipped with an appropriate insulated glass unit) is equivalent to brickwork up to 50 cm thick , which means that heat loss with a closed door will be minimal.

Panoramic glazing is one of the modern trends in design and architecture. Large areas of see-through glazing look great both in office buildings and in private houses as they improve the appearance of the building itself and increasing the amount of natural lighting.

 

Smart-Slide sliding system is a solution that fully corresponds to these trends. Sliding structures provide large glazing area and space efficiency: the doors move in the same plane and do not take up a lot of space. At that, even a large heavy sash moves on the guides with little effort, so that the daily opening and closing of the Smart-Slide door will not cause problems.

from 75€

Calculate Cost
Space efficiency
Space efficiency
Easy to use
Easy to use
Easy sash move
Easy sash move
Stylish modern design
Stylish modern design

Space efficiency

Space should be used rationally even in a spacious house. But if it is referred to a small room, the choice in favor of the most compact solutions becomes obvious. To open the Smart-Slide sliding door, you simply move the sash aside - the space efficiency compared to the classic swing door design is obvious!

Two-section design

Maximum size of the opening part - 1570 x 2500 mm (in white).

Three-section design

For laminated structures, the maximum dimensions are slightly reduced to compensate for color profile thermal deformation.

Four-section design

Maximum frame dimensions - 4500 x 2600 mm (in white).

Easy to use

The easy move of the sash is one of the obvious advantages of the Smart-Slide sliding system. The rollers located on the top and bottom surfaces move without effort along the guides when opening or closing the door. And it works completely silently with minimal maintenance of the mechanism!

Smooth move of the sash

Maximum tightness and reliability

Ensuring that a large and heavy sliding door closes securely is a complex engineering challenge. In the case of Smart-Slide designs, this was solved through the precise fit of all elements and the use of additional components: rod, rubber weather strip and insulated glass unit glued to the pane.

Additional hold down

Easy to use

The Smart-Slide system was originally designed in view of maximum ergonomics: all its details are carefully thought over and fit perfectly and precisely. As a result, we have a sliding door that you can use with the maximum comfort!

The door is closed

The sash is closed when the handle is pointing downward. You can set the sash in the closed position in any part of the opening: this makes it easier to ventilate.

Door is opened

The sash is unlocked and can move freely along the guides when the handle is pointing upward.

Triggering of erroneous action blocker

The sash move is impossible when the handle is in the 90° position. This prevents accidental sliding of the open sash back.

Access to the premises under your control

You can determine the Smart-Slide door handing on your own. For this purpose, the system is equipped with the appropriate handles: installation of one-sided and double-sided model is possible.

One-sided handle

Comfort of movement

The door sill with aluminum plate is an ideal solution for Smart-Slide doors installed in the high foot traffic areas. The aluminum door sill can withstand high weight loads without any deformation, scratching or wearing out. And the smooth aluminum surface is fairly easy to clean.

The door sill with aluminum plate

Get In Touch

Need advice? We're here to help.

At ECOVEN, our expert team guides you through every step of your aluminum and PVC carpentry project, from the initial concept to final installation.
We offer our services in Barcelona, Cerdanyola, Ripollet, and Sant Cugat, always prioritizing exceptional customer service.

Do you have questions or need a customized quote? Fill out our contact form, and one of our specialists will get back to you as soon as possible.

Call us +34 900 123 456 Email us info@ecoven.com
Showroom Marina 45, BCN
Hours Mon–Fri 9:00–18:00

ECOVEN PREMIUM

Schedule Your Free Assessment