In Barcelona, replacing the windows in a flat costs roughly between 250 and 550 € per square metre installed, depending on the material and the type of opening. For a standard casement opening that works out at 300 to 700 € per window, with fitting and removal of the old one included.

The range is deliberately wide. The price of a window is not decided by the material — it is decided by six things, and four of them appear in no catalogue. This article explains what they are, what a quote has to contain before you can compare it with another, and what changes when the flat is in Barcelona rather than anywhere else.
| Material | Per m² installed | Per standard window |
|---|---|---|
| PVC | 250 – 400 € | 300 – 600 € |
| Aluminium with thermal break | 350 – 550 € | 350 – 700 € |
| Timber | 400 – 700 € | 500 – 1.000 € |
| Timber-aluminium composite | 500 – 800 € | 700 – 1.300 € |
Indicative ranges from the Spanish market, not an Ecoven quote. They include the window, the installation, removal of the old unit and making good. Your case may fall outside the range in either direction, and that is normal.
Why nobody should give you a fixed price over the phone
It is not a sales dodge. The price depends on the opening, and the opening cannot be seen down a phone line.
An opening in a 1960s Eixample building and one in a new-build at Diagonal Mar can take exactly the same window and cost quite different amounts to fit. In the first, the frame is rarely plumb, the jamb may be damp inside, and occasionally a lintel turns up that has to be rebuilt. That is building work, and it is quoted separately.
So any price per square metre given before anyone has measured is an estimate, and estimates almost always rise. If someone commits to a figure without seeing the opening, the right question is not how much it costs. It is what happens when the fitter arrives and the measurement does not match.
The six things that move the price
1. Size, but not proportionally
A window twice the area does not cost twice as much. Past a certain size it needs internal reinforcement, heavier hardware and more than one person to lift it. The jump in price sits at that technical threshold, not in the centimetres.
2. The type of opening
A casement is the cheapest. Tilt-and-turn adds hardware. A three-metre lift-and-slide door is a different category altogether, because the mechanism that moves that weight with two fingers costs what it costs. If you are torn between hinged and sliding, decide how you will actually use the window first, then look at the price.
3. The glass
There is more price difference here than in the frame, and it is where you notice the result most. Low-e for cold, solar control for a south facade, acoustic laminate if you sleep above a street, triple glazing if you are badly exposed. Each layer solves a different problem, and it is only worth paying for the one that solves yours.
4. Colour and finish
Standard whites and greys sit inside the normal price and lead time. A custom lacquer adds roughly two weeks and a percentage to the cost. It is not a hidden extra: it is a decision taken before manufacture, and it should appear in the quote from the start.
5. The condition of the opening
If the jamb is sound and the lintel firm, fitting is clean and quick. If something has to be cut back, a lintel rebuilt or damp treated, that is building work and is quoted separately and in writing. This is the factor that produces the most surprises in flats built before the 1980s, and the only one that can be anticipated by measuring before manufacturing.
6. Who fits it
This is the part nobody compares and the one most visible five years later. The best system badly fitted performs worse than an average system fitted well: if the window is not level on all three axes and the perimeter seal is not continuous, the air will find its way in every winter. This does not appear on any data sheet. You have to ask.

Why one quote looks far cheaper than another
Almost always for the same reason: one includes fitting and the other does not. In aluminium you will see prices of 200 – 350 € per square metre that cover supply of the window only. The same job, fitted and with the old window taken away, sits at 350 – 550 € per square metre.
That does not mean the first one is lying. It means you are not comparing the same thing. Before you look at the bottom line, check what is inside each one.
What a serious quote has to contain
If any of these are missing, the quote is neither expensive nor cheap — it is not yet a quote.
- The specific system and manufacturer, by name, not just “aluminium with a thermal break”.
- The actual glass build-up, and its acoustic rating with that build-up.
- The Uw of the whole window, not only the Ug of the glass.
- Measurements opening by opening, not one total area.
- The colour and finish type, with the lead time it implies.
- Whether fitting, removal of the old window and making good are included.
- What happens if something turns up when the opening is stripped back.
- The delivery date and the week of installation.
- The guarantee, itemised: the system and the installation are two different things.
What changes because the flat is in Barcelona
Four things come up here more than elsewhere, and they are worth knowing before you ask for quotes, because they affect the timeline and sometimes the price.
- Listed buildings. Across much of the Eixample, Gràcia and Ciutat Vella the facade is protected. You can usually still change the window, but the glazing division, the colour and the visible frame width seen from the street have to be respected. It is solved with a narrow sightline profile and a colour matched to the original joinery.
- The owners’ association. Changing the external appearance of the facade normally needs the community’s approval. Worth asking before you order, not after.
- Municipal permits. Replacing windows without altering the opening is usually handled as a minor-works notification, but it depends on the district and the building’s protection level.
- Access. A building with no lift, a narrow staircase, or a window that only comes in from the facade changes the installation. If a crane or platform is needed, you have to allow for a street occupation permit and its processing time.
How to compare three quotes without being technical
You do not need to be an engineer. You need five questions, and the answers will tell you more than the three figures.
- Does the price include fitting, removal of the old window and making good?
- Exactly which glass, and what acoustic reduction does it give with that glass?
- Who measures, and when? If nobody measures before manufacture, the price will change.
- What happens if the opening is not as expected? Ask for that answer in writing.
- Can you give me two customers I can call without you present?
The last question tells you the most. A company that has worked in the same city for years always has someone to send you to.
Frequently asked questions
How much does it cost to replace all the windows in an 80 m² flat in Barcelona?
An 80 m² flat usually has between 6 and 9 openings. Using the ranges in the table, that puts the whole job roughly between 1,800 and 6,300 €, fitting included. The difference between the two ends is not the material: it is the size of the openings, the type of opening and the glass each facade needs.
Is PVC cheaper than aluminium?
Generally yes, for the same performance. PVC insulates very well by the nature of the material; aluminium with a thermal break allows slimmer profiles, more glass area and wider spans. In a listed building, aluminium is often the only way to respect the original proportions of the joinery.
Can I replace just one window?
Yes, and sometimes it is the sensible thing to do. Start with the room facing the street, live with it for a month, and decide the rest from experience rather than from a catalogue.
How long does it take?
Manufacture runs from two to six weeks depending on the system and the colour; a custom lacquer adds about two weeks. Installation in a flat is usually one to four days, with the owners living at home, which is normal.
Does the price include taking the old window away?
In a serious quote, yes, and it should say so in writing along with removal of the debris. If it is not there, ask before you sign: it is one of the items most often left out to make the final figure look lower.
Read on
If you want a real figure for your own case
The survey is free and commits you to nothing. A technician comes, measures each opening at three points, looks at the orientation and the state of the frame from the inside, and explains what he sees while he sees it. If what you need is a repair rather than a new window, we will tell you there and then.
The quote arrives in writing within five working days, item by item, with the system and the glass named. The price does not go up afterwards, and if you take three months to decide it still stands.
Book the survey — or call us on +34 663 42 97 39.


