CS 77 Sunrise
CS 77 Sunrise is a window configuration of the ConceptSystem 77 platform adapted to PVC euro-groove hardware. A dedicated sash profile and a box solution for insertion into facade systems allow fabricators to source window hardware locally, provided the mechanical and physical characteristics of the window are preserved. Profiles are supplied pre-protected with branded film, with convenient gasket lengths and optimised accessory quantities per pack.
from 75€
Calculate Cost
Where CS 77 Sunrise fits
A fabrication-led variant of ConceptSystem 77 aimed at controlling the cost of a finished window.
Hardware flexibility
Sash profile 008.0601.XX carries a groove for PVC hardware, so a fabricator can use euro-groove fittings already held in stock rather than system-specific ironmongery.
Facade integration
Box solution 008.3139.XX is designed for insertion into a facade system, allowing opening lights to be set into curtain walling without a separate detail.
Supply efficiency
Convenient gasket lengths, optimised accessory quantities per pack and pre-protected profiles from stock reduce waste and handling in the workshop.
Technical indicators
- Minimum visible frame width, frame (Classic)
- 51 mm
- Minimum visible frame width, sash (Classic)
- 46 mm
- Overall window depth, frame
- 68 mm
- Overall window depth, sash
- 77 mm
- Rebate height
- 25 mm
- Glass thickness
- up to 63 mm
- Thermal transmittance (Uf)
- Uf > 1.5 W/m²K, depending on profile combination
- Sound reduction (Rw (C; Ctr))
- < 42 (-2; -4) dB, depending on glazing type
- Air permeability
- up to 600 Pa (class 4)
- Wind load resistance
- up to 1600 Pa (class 4)
Advantages
CS 77 Sunrise takes the ConceptSystem 77 geometry and adapts it to a cost-controlled fabrication route. The hardware groove, facade box profile and stock supply programme are the point of the variant, with performance held to the familiar European classes.
- Special window sash 008.0601.XX with a groove for PVC hardware.
- Box solution 008.3139.XX for insertion into a facade system.
- Air permeability class 4 and wind load class 4 at 1600 Pa.
- Burglar resistance WK 2 to the European standard ENV 1627-1630.
- Pre-protected profiles from stock with branded protective film.
Get In Touch
Need advice? We're here to help.
At ECOVEN, our expert team guides you through every step of your aluminum and PVC carpentry project, from the initial concept to final installation.
We offer our services in Barcelona, Cerdanyola, Ripollet, and Sant Cugat, always prioritizing exceptional customer service.
Do you have questions or need a customized quote? Fill out our contact form, and one of our specialists will get back to you as soon as possible.
ECOVEN PREMIUM