Framex FT72
Framex FT72 is the thermally broken window and door series in the Framex range. A 72 mm frame and an 80.4 mm sash carry a three-contour closing seal in synthetic rubber and EPDM, with insulated glass units from 24 to 62 mm. Profiles are extruded in 6063 alloy, powder coated to any RAL shade, and can be built directly into a Framex facade. The door variant uses a 72 mm sash with two seal contours.
from 75€
Calculate Cost
Corner Aluminum Connector LC063
The LC063 connector for the reinforced door frame/sash of the 72nd series ensures a more rigid corner connection due to the following characteristics:
- Increased contact area between the connector and the profile wall.
- Additional grooves for pins on the inside.
- Compression grooves for double knives.
- Special gaps for glue application.
- High production accuracy.
- Solid form of the joint eliminates the possibility of deformation.
Aluminum Profile Mullion Framex 72A03
- Increases the opening area of a double-leaf window;
- Suitable for sashes with European groove V01;
- Compatible with hardware from leading manufacturers.
Window Sashes 72PVW1-C, 72PVW2-C, 72PVW3-C with PVC Hardware Groove
- Designed for use with PVC hardware groove from leading manufacturers: GU, ROTO, MACO. Also, hardware with a low cost from Ukrainian manufacturers.
- Available in 3 sash sizes, allowing sash heights up to 2500 mm.
- Assortment allows increasing the light opening in small constructions.
- Implementation of tilt-and-slide constructions with GU, ROTO hardware.
Aluminum Profile Reinforcement Framex 72MP1
- Reinforcement 20x120 mm for connecting both window and door frames.
- Allows reaching a construction height of up to 4000 mm.
- Visually structures the appearance to a mullion-transom system.
Framex 72 Reinforced Door
- Allows manufacturing constructions up to 2800 mm in height.
- Wider choice of hardware, with 35 mm door mass.
- Reinforced profile walls.
Extensions 72DF1, 72DF2, 72DF3
- Increases the visible height of the frame.
- Does not violate the insulation integrity.
Aluminum Profile Reinforced Mullion Framex 72MS
- Used in showcase glazing.
- Installation at height with glazing from the inside.
- Glazing height up to 4500 mm.
- Possible to mount a door on a corner hinge.
Aluminum Profile Pivot Framex 72A04
- Allows integrating a door sash into a window frame.
- Ability to install a door sash on a reinforced mullion.
- Technical solution for a transom above the door as one construction.
Aluminum Profile Threshold Framex 72A09M
- Low threshold height - 12 mm.
- Easy installation, including on previously installed constructions.
- Possibility of system dismantling in installed construction.
- Hidden fastening.
- Increased energy efficiency.
Technical indicators
- Frame installation depth
- 72 mm
- Sash Installation Depth
- 80.4 mm
- Filling Thickness, mm
- 24–62 mm
- Thermal insert
- 34
- Profile thermal transmittance coefficient (Uf)
- 1,4 W/m².K
- Profile thermal resistance coefficient (Rf)
- 0,71 m²°С/W
- Sealing system
- 2 contours, EPDM
- Sealing material
- Synthetic rubber, EPDM
- Min Sash Dimensions
- 500х600 mm
- Max Sash Dimensions
- 1100х2300 mm
- Max weight of the sash
- 180 kg
- Hardware
- Europaz V.01 “Type 1″/ axis 13 mm
- Alloy
- 6063 Т6
- Installation in facade systems
- Yes
- Burglary protection
- RC2
Get In Touch
Need advice? We're here to help.
At ECOVEN, our expert team guides you through every step of your aluminum and PVC carpentry project, from the initial concept to final installation.
We offer our services in Barcelona, Cerdanyola, Ripollet, and Sant Cugat, always prioritizing exceptional customer service.
Do you have questions or need a customized quote? Fill out our contact form, and one of our specialists will get back to you as soon as possible.
ECOVEN PREMIUM